140B W. Grand Lake Blvd
West Chicago, IL 60185
voice 630-231-2210
fax 630-231-2394
ModHyd@gmail.com
 

 
 
Structural Moving
Crib Jacks
Power Packs
Unified™ Machines
Automotive Equipment
Die Separators
4-Jack Model
6-Jack Model
Remanufacturing
Rentals/Leasing
Used Equipment for Sale
Rants & Raves
The Past
The Future
What's New
Links
Contact Us
Site Map
Home
 

Crib Jacks
-Structural Moving-


Click image to enlarge

Modern Hydraulics offers three types of crib jacks for structural moving: Black Jack Crib Jacks, Spring-Return Crib Jacks and Non-Spring Return Crib Jacks. Spring-Return and Non-Spring Return jacks are early crib jack models that are no longer available to purchase. Parts and service are offered for all 3 models.

For specific information about Modern Hydraulics
Crib Jacks, click the link of interest:

 

BLACK JACK CRIB JACKS

You don't buy a crib jack to use it once.
You don't buy a crib jack because it's cheap.
You buy a crib jack to use it for decades.

So why buy an inferior crib jack?

Black Jack Crib Jack, Structural Moving Systems, Modern Hydraulics
Click image to enlarge

This is THE BEST crib jack on the market today and this is why:

  • The top bushing is made of super-strong aluminum bronze that does not collapse and seize the piston when the jack is over-extended

  • The heat treated, hardened cylinder resists damage and distortion from overloading and scratching from dirt and debris

  • The black surface treatment inside and out resists rust and corrosion far better than chrome plating and will never flake off

  • The removable plug in the bottom of the cylinder allows you to completely clean out the cylinder when rebuilding it

  • No special tools or techniques are needed to replace the seals

  • The high-strength aluminum alloy base is both light and strong and features carrying handles

  • Jacks have the strongest return spring available

  • Seal kits and other parts available at SPX/Power Team dealers

SPECS

  • 15 tons maximum load capacity at 6000 PSI maximum

  • Tall jack is 25" long when retracted with 17" stroke

  • Short jack is 16" tall when retracted with 9" stroke

  • Short jacks are used when conditions prevent using the tall jack,
    i.e. high water table, rock close to the surface, etc

  • High-strength aluminum alloy base fits both jacks

PRICES & ORDERING

  • High-Strength Aluminum Alloy Base (only) $475

  • Short Jack (only) $945 

  • Short Jack and Base with choice of quick coupling $1345

  • Tall jacks (only) $995 

  • Tall jack and base with choice of quick coupling $1395

To order, please contact us:

Modern Hydraulics/Nevada LLC
140B W. Grand Lake Blvd.
West Chicago, IL USA 60185
Voice 630-231-2210
Fax 630-231-2212
Email ModHyd@Gmail.com

return to top

 

SPRING-RETURN CRIB JACKS

For more information about Modern Hydraulics original spring-return crib jacks, Parts & Service or Troubleshooting, please contact us:

Modern Hydraulics/Nevada LLC
140B W. Grand Lake Blvd.
West Chicago, IL USA 60185
Voice 630-231-2210
Fax 630-231-2212
Email ModHyd@Gmail.com

return to top

 

NON-SPRING RETURN CRIB JACKS

For more information about Modern Hydraulics original non-spring return crib jacks, Parts & Service or Troubleshooting, please contact us:

Modern Hydraulics/Nevada LLC
140B W. Grand Lake Blvd.
West Chicago, IL USA 60185
Voice 630-231-2210
Fax 630-231-2212
Email ModHyd@Gmail.com

return to top

Structural Moving | Automotive Equipment Die Separators | Used Equipment for Sale Rants & Raves | The Past | The Future | What's New
Links
| Contact Us | Site Map | Home