POWER PACKED POWER PACKS!
Our line of Power Packs are the best designed, most popular line of Power Packs made for the Structural Moving industry
Power Packs are simply a tank, pump, motor, control valve, and outlet manifold with jack control valves.
They are not "UnifiedTM" Jacking systems, they DO NOT automatically synchronize the travel of the jacks...it is up to the operator to properly prepare the load for jacking and to control the jacks to prevent distortion and damage to the load.
To raise loads using Power Packs without distorting the load, you will normally jack on three points, but with proper location and sizing of the steel beams under the load, it is possible to raise the load by first jacking one side up, then jacking the other side up, or raising the load by jacking one end then the other.
These machines can be used with jacks other than crib jacks.
This is our most popular model.
It is designed to operate crib jacks, but can be used to operate the jacks and/or steering cylinders in dollies.
To learn more, click on it!
This model is designed for use with crib jacks and has an extra capacity oil tank that makes it
suitable for use dollies with jacks and/or hydraulic steering cylinders.
To learn more, click on it!
This is our most powerful power pack! Designed for use with dollies equipped
with hydraulic cylinders, it's really too fast for use with crib jacks.
To learn more, click on it!